The total dreging skid in the video, includes submersible pump, submersible motor, cutter coupled and support kits.
There are two cutter 55kw rated at 33rpm, submersible pump 500kW 600V.
Case Show - Dredging Skid
Dredging Work in Water Reservoir
55
KW Cutter × 2
Two electric cutter head
550
kw submersible pump
Q=2000m3/h,H=40M,n=580rpm, 500kW/600V.
Submersible Depth 120m
The submersible slurry pump is TDSP series with single-stage and in type of centrifugal pump, which is composed of pump casing, impeller,cutter head.
Components which liquid flows through is made from wear-resistant cast iron of high chrome, and special choice might be made as per working conditons.
The suction efficiency is improved during running of cutting head and the density of liquid is also getting higher at the same time. Pump and motor are coaxial, which realizes axial force by the pump to be delivered on to the motor directly, so the pump can work as randomly positioned.
Pleae provide following items as much as possible when purchasing order, or contact our technical support to help select the right model:
1.Pump capacity and head.
2.Power supply and frequency.
3.The maximum submersible depth.
4.The maximum diameter of solid.
5.Working medium and temperature.
6.The maximum slurry content of water.
7.Installation and using mode.
