Dredger is mainly through the suction pump to suction mud, so that the suction pump is the core of the dredger is not at all. Especially in the winch suction dredger, completely rely on the suction pump to suck the silt up. Therefore, the suction mud pump for the dredger must be its regular maintenance work, so as to ensure that the suction mud pump in the excavation work to play a higher efficiency.
1. Lubrication of suction pump
Suction pump is made of bearing parts to run through lubricating oil, if there is no lubricating oil, the friction coefficient between the parts will increase, if serious, it will also happen to hold the danger of tile. So we should regularly apply lubricant to the suction pump in daily use, so as to ensure the normal operation of each part.
2. Anti-corrosion maintenance
Mud suction pump in the process of running is often in contact with silt and water, a large number of long-term mud and water splash to the pump, if not for a long time on its maintenance, the pump casing will appear oxidation phenomenon. Although the exterior of the pump casing is coated with waterproof paint, but a long time of use, waterproof paint will also appear different degrees of shedding. Therefore, it is necessary to paint the waterproof paint on a regular basis, and also do a good job of waterproofing the suction mud pump.
3.Replacement of fan blade
After a long period of use, the fan blade will have different degrees of wear and tear, so regular inspection and maintenance of the fan blade is very necessary. If the fan blade is found to be seriously worn, it is necessary to replace the new fan blade immediately, so as to ensure that the suction pump can play a normal performance.
Phone Number
(86)0536-2222696
trodat@trodatgroup.com
