Needs to Know about TRODAT dredging rubber hose before ordering
TRODAT can supply dredging rubber hoses of different specifications, lengths, and uses, with a maximum length of 10m. Customized service is also available.
Features of TRODAT dredging rubber hose:
Can match expansion caused by heat and contraction caused by cold, elasticity, and flexibility (pulse) of the dredging rubber hoses' connectors. The dredging rubber hose has advantages of anti corrosion, anti wear, anti aging, easy to bend, being suitable for complex terrains and environments of various construction projects.
Attention before using TRODAT dredging rubber hose
It is prohibited to move or rub the dredging rubber hose on the surface of hard and rough objects.
It is prohibited to come the dredging rubber hose into contact with hard blunt or sharp objects.
The bending curve of the dredging rubber hose should be gentle, and a reasonable angle (40 °) and inner diameter should be maintained as much as possible to avoid affecting the workload and service life of the dredging rubber hose.
It is also prohibited to directly drive other objects by the dredging rubber hose, and squeezing the dredging rubber hose is also prohibited.
The negative pressure (for adsorption) hose should avoid facing external disturbance, squeezing, movement, and collision in vacuum condition. When starting or moving the bottom (end) of the workpiece, some method should be used to start the low (end) or water valve first, and direct starting or movement of the dredging rubber hose is prohibited.
Suggestions upon using of TRODAT dredging rubber hose
1. Try not to fix one end with the other end being suspended for a long time.
During work, must avoid local stress (non natural) and it is necessary to have support at the bottom of the dredging rubber hose. After working for a period of time, the dredging rubber hose needs to be flipped by 90 degrees according to its fatigue state(due to the large workload on the bottom surface and the lighter weight on both sides or top, for the purpose of fully utilizing its performance). During storage or standby, it is not allowed to be put outdoors.
The fine TRODAT dredging rubber hose should be taken good care of at your side and thank you!
2. When selecting TRODAT dredging rubber hoses, should consider factors: diameter, conveying medium, working pressure, length, wear resistance (or other oil, acid, cold, heat), working pressure. Due to different requirements on conveying medium, location, applied industries, working condition, significant differences in sand or soil quality, fully communication with our pre-sales technical support should be done.
