TRODAT (Shandong) Marine Engineering Co., Ltd
+86-0536-2222696
Contact Us

Hydraulic Cutter Drive Device For CSD Dredger

Jul 01, 2024

Hydraulic cutter drive device is installed at the front of dredger's cutter support, which is mainly composed of bus-base, cutter gear, hydraulic motor, coupling, transmission bearing assembly, cutter head.

hydraulic cutter head

Gearbox

Three small gears drive a big gear in the centre, and the dynamic power transmit through coupling and transmission shaft, meanwhile,mechanical seal is set on the output shaft terminal. 

 

Hydraulic motor is China brand with four middle power.

The driving method is that the hydraulic motor directly drives the cutter shaft by connecting the short shaft and the toothed coupling, letting cutter to rotate and perform cutting motion.

 

A model of parameter list

Motor Model

Motor Displacement

Highest Pressure

Rated Working Pressure

Highest Working Speed

 

Gearbox support seat including joint bearing support, which is adjustable on position of gearbox to ensure coaxiality between gearbox and front end shaft.

 

The transmission system adopts a floating mechanical seal and a skeleton oil seal device to prevent mud and sand from entering. Front end shaft device includes front and rear floating seal, equipped with 3 bearings, two self-aligning bearings at the front end, and a double row tapered roller bearing at the rear end). 

 

Coupling for connecting gearbox and front shaft.

hydraulic cutter assembly

This winch can achieve a combination of stepless and stepless speed regulation.

The teeth on the cutter can be replaced with different types of teeth to meet the requirements of excavating different soil types.

A set of cutter heads has movable teeth installed(cutter teeth, tooth pins, and tooth seats using IHC compatible model 20-CB-P), with 10 cutter teeth on each blade and 5 evenly distributed guard ring teeth on the cutter ring.

 

Connecting support between gearbox and front shaft.

Optional: suction flange for matching suction port. 

Flange plate to connect with hydraulic cutter drive device.