TRODAT (Shandong) Marine Engineering Co., Ltd
+86-0536-2222696
Contact Us

High-Efficiency Amphibious Dredging Equipment—Water King Dredger

Mar 05, 2025

Waterking Dredger – High-Efficiency Integrated Dredging Equipment

The Waterking dredger is specially designed and manufactured for shallow water dredging operations. It is a unique combination of an excavator and a cutter suction dredger. It can safely and cost-effectively perform various dredging, piling, and raking operations from land to a water depth of T1.

Working Principle
The excavation and soil-breaking process is achieved through the rotational movement of the cutter installed at the front end of the cutter bridge. The rotating cutter continuously loosens the riverbed sediment and mixes it with water. Under atmospheric pressure, the mixed slurry is drawn into the dredge pump through the suction inlet, pressurized, and then transported to the reclamation area via the discharge pipeline.

The dredging process consists of excavation, suction, and slurry transportation. Excavation capacity is influenced by factors such as cutter type and structure, cutter power, cutter rotation speed, transverse movement speed, and cutting thickness. Suction capacity depends on factors like suction inlet size, suction resistance, and dredge pump performance. Transportation capacity is determined by pump speed, dredge pump efficiency, pump performance, input power, and pipeline characteristics.

 

Operating Characteristics

Unlike traditional dredging equipment, the Waterking dredger integrates excavation, suction, and discharge into a single continuous operation, ensuring efficient and uninterrupted dredging performance.

news-1600-229

 

1

Operating Methods

1.Cutter Suction Dredging Operations

The Waterking dredger's cutter pump is the core working unit for cutter suction dredging. It can discharge dredged sediment directly to an onshore disposal site (or a dewatering system) through a discharge pipeline or spray it directly onto the shore using a discharge pipe.

The hydraulic-driven submersible dredge pump, with a suction inlet located only 60 cm from the cutter head, ensures high slurry concentration, significantly improves suction performance, effectively prevents sludge dispersion and secondary pollution, and reduces the workload for sludge dewatering.

The maximum discharge distance of the Waterking cutter pump is approximately 1,500 meters. When paired with a booster pump station, each unit can extend the discharge distance by an additional 1,000 meters.

2.Backhoe Dredging and Environmental Clamshell Dredging Operations

Backhoe dredging can excavate and transfer sediment onto the shore or directly into a barge. The Waterking dredger is equipped with a hydraulic clamshell grab with rubber sealing plates, a commonly used environmental dredging tool. It effectively prevents the secondary pollution of toxic and hazardous sediments.

3.Raking Operations

The rake is a highly practical construction tool that efficiently removes aquatic plants, such as water hyacinths. It is also used to clear household waste and aquatic vegetation before cutter suction dredging operations.

4.Piling Operations

In modern urban river and lake environmental restoration projects, it is necessary not only to remove bottom sediments and debris but also to install piles for bank protection. The Waterking dredger is equipped with a Movax SP30 hydraulic vibrating pile driver, which can drive steel sheet piles, steel pipe piles, and wooden piles into hard soil.

Thanks to its side-gripping pile clamping method, it can accommodate significantly longer piles, enhancing its operational capability.

20240712141511882f4